- Rootstock and scion it is easy to match the U-cut, V-cut, or Ω-cut, rapid healing
- Using easily and fastly. Grafting method than the traditional savings
- The time and effort Blade can be replaced
- Use the pruner to cut useless branches from the plant
Materials: Carbon steel, ABS and Aluminum
Cut grafting stocks from 5mm up to 1.4cm diameter
Trimming blades: 3mm thick
Size: 27cm * 10cm/10.5inch * 3.9inch (1cm=0.39Inches)
Packaging: 1 Set(1 Grafting pruner with 2 additional blades)
How to use:
Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut the stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
Keep out of reach of children do not use on dry or old hardwood
It is manual measurement, there may be a 1-2mm error.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.